
Heat Pumps & Mini-Splits in Milford, MA
Mass Save's 2026 whole-home heat pump rebate is $2,650 per ton up to $8,500 per home, and Milford's electric utility, National Grid, is a Mass Save sponsor. The catch is the weatherization condition, and Milford has older homes.
Free HVAC Quote in Milford
Heat pump rebates for Milford homes
National Grid is Milford's electric utility and a Mass Save sponsor, so the standard Mass Save heat pump rebates apply to its customers. For equipment installed from January 1 to December 31, 2026, the whole-home air source heat pump rebate is $2,650 per ton, up to $8,500 per home, with one whole-home rebate per customer account. Applications are due by February 28, 2027, the work has to be done by an eligible Mass Save heat pump installer, and income-qualified households may receive more. Program terms can change, so confirm them at masssave.com.
The weatherization condition
A whole-home rebate requires the home to be sufficiently weatherized first. That is met if the home was built in 2000 or later, if a Mass Save Home Energy Assessment recommends less than $1,000 of weatherization work, or if recommendations made in 2013 or later were completed. In Milford only 10.6% of homes date from 2000 or later, while 68.9% predate 1980, so a large share of owners will start with an assessment and some air sealing or insulation.
Who gains the most
Homes heated with oil (4,079 in Milford) or bottled gas (423) are the usual candidates, because a heat pump replaces a fuel they buy by delivery. Homes with baseboard electric heat can also benefit. Partial-home rebates exist for houses that keep a fossil-fuel system for the coldest days.
Ducted or ductless
A ducted heat pump reuses or adds ductwork and suits houses that already have it in good shape. A ductless system puts an indoor head in each zone and suits radiator-heated houses, additions and apartments. Many homes end up with a mix, and the choice follows the layout of the house rather than a rule.
Mini-splits for apartments and additions
With 31.7% of Milford homes in multi-unit buildings, a ductless mini-split can heat and cool one apartment, a finished attic or a sunroom without touching the rest of the building. See the cooling page for how ductless fits the town's mix of homes.
Mass HVAC near Milford

How It Works
Call or send the form
Get a written estimate
Pick a time
Job done right

No Heat? No AC? We're On It.
Rated 5 out of 5
“Excellent customer service ❄️🔥”
Robert Rangel SilvaGoogle · Translated from Portuguese
Frequently Asked Questions About Mini-Splits in Milford
Common questions about heat pumps & ductless mini-splits in Milford, MA.
It qualifies if you are a National Grid customer, the equipment is installed in 2026 by an eligible installer, and the home is sufficiently weatherized. If it was built before 2000, a Home Energy Assessment is the usual route. Rebate terms can change, so check masssave.com.
Yes. A partial-home setup keeps the existing system for the coldest days while the heat pump carries most of the year. The Mass Save partial-home rebate is $1,125 per ton, up to $8,500, with extra bonuses for weatherization and sizing.
Cold-climate heat pumps are designed for them and are the type Mass Save rebates target. Sizing and the quality of the installation matter more than the brand, which is why we calculate the heating load of your house before we quote.





